Canon IPF8400S - Messages Regarding Paper; Paper Mismatch; Mediatype Mismatch

Messages regarding paper
Messages regarding paper
Paper mismatch .............................................................................................................................................................. 884
MediaType Mismatch ................................................................................................................................................... 884
The paper is too small. ................................................................................................................................................. 885
The paper is too small. ................................................................................................................................................. 885
PaprWidth Mismatch .................................................................................................................................................... 886
Paper size not detected. ............................................................................................................................................. 886
Insufficient paper for job ............................................................................................................................................ 887
This paper cannot be used as size is not supported. .................................................................................... 887
Cannot execute this command. Use other paper. ........................................................................................... 895
Roll printing is selected. .............................................................................................................................................. 887
Roll printing is selected, but sheets are loaded. ............................................................................................... 887
The roll is empty. ............................................................................................................................................................ 888
No sheets. .......................................................................................................................................................................... 888
Sheet printing is selected. .......................................................................................................................................... 888
Regular printing is selected, but a roll is loaded. ............................................................................................. 888
Paper jam. .......................................................................................................................................................................... 889
Paper loaded askew. ..................................................................................................................................................... 889
Cannot detect papr ....................................................................................................................................................... 889
Cannot feed paper. ....................................................................................................................................................... 890
Cannot cut this paper. ................................................................................................................................................. 890
End of paper feed. ......................................................................................................................................................... 890
Rel lever is in wrong position. ................................................................................................................................... 890
Rewinding error. .............................................................................................................................................................. 891
Media take-up unit ready. ........................................................................................................................................... 891
Turn on the media take-up unit. .............................................................................................................................. 891
Borderless printng not possible. .............................................................................................................................. 891
Paper position not suitable for borderless printing. ....................................................................................... 892
Paper mismatch
Paper mismatch
Cause Corrective Action
You tried to print a test pattern for printer adjustment
on several sheets, but sheets of different types or
sizes of paper were used.
When printing a test pattern for adjustment, use sheets of the same size and type
of paper, in the required quantity.
Press ▲ or ▼ to select Change Paper, press the OK button, and replace the pa-
per.
(See "Loading and Printing on Sheets.") ➔ P.25
The printer now starts printing the test pattern.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
MediaType Mismatch
MediaType Mismatch
Cause Corrective Action
When Detect Mismatch in the Control Panel
menu is set to Pause, the type of paper loaded
does not match the type specified in the printer
driver.
Follow these steps to ensure the paper type matches on the printer and in the printer
driver.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Change the paper type setting in the printer driver to the type loaded in the printer
and try printing again.
Follow these steps to ensure the paper type matches on the printer and in the printer
driver.
1. Press ▲ or ▼ to select Change Paper, and then press the OK button.
Paper mismatch iPF8400S
User's Guide
Error Message Messages regarding paper
884