Canon IPF8400S - Specifying Paper in the Printer Driver

• Color Settings Pane: Monochrome ➔ P.332
• Object Adjustment dialog box: Monochrome ➔ P.333
• Gray Adjustment Pane ➔ P.334
• Page Setup Pane ➔ P.335
You can specify the page size of the original, borderless printing, enlargement or reduction, the orientation, the
paper size and source, and automatic cutting.
• Additional Settings Pane ➔ P.336
You can specify settings for how print jobs are sent to the printer.
With the imagePROGRAF Free Layout feature, you can arrange originals from various source applications on a
single page before printing. For details, see "Free Layout." ➔ P.360
With the imagePROGRAF Preview feature, you can check the layout before printing and adjust layout or size set-
tings while viewing a preview screen. For details, see "Preview." ➔ P.337
With the Color imageRUNNER Enlargement Copy feature, you can automatically enlarge and print scanned origi-
nals from a Color imageRUNNER. For details, see "Color imageRUNNER Enlargement Copy." ➔ P.384
Specifying Paper in the Printer Driver
Specifying Paper in the Printer Driver
If you have replaced the paper, you must complete the following settings in the printer driver.
1 This sets the B Format for and C Paper Size.
Note
•
The configuration method varies depending on the OS
and application software you are using.
If Page Setup is displayed in the application menu, the
settings are configured by opening the Page Attrib-
utes dialog box from Page Setup.
If it is not displayed, the settings are configured in the up-
per part of the printer driver displayed when you select
Print from the application software menu.
2
Select the printer in the
A Printer list.
3 Choose the original size in the F Paper Size list.
4 If you configured the settings using the Page Attributes dialog box, click F OK to close the dialog box, and
then select Print from the application software menu.
iPF8400S
Specifying Paper in the Printer Driver
User's Guide
Mac OS Software Printer Driver
319