Cause Corrective Action
Note that this is displayed when all of the following are satisfied.
•
If Set Exec. Guide is On in the Control Panel menu.
•
If the printer is loaded with a type of paper on which color calibration cannot be executed.
(See "Color Calibration Using the Printer
Sensor.") ➔ P.735
Set Set Exec. Guide to Off on the Control
Panel menu.
(See "Menu Structure.") ➔ P.586
Please commn calibrt using above paper.
Please commn calibrt using above paper.
Cause Corrective Action
It is now recommended that you execute Common calibration.
Note that this is displayed when Set Exec. Guide in the Control Panel menu is set to On and any of the
following is true.
•
If the printer is loaded with a type of paper on which color calibration cannot be executed and the prede-
fined conditions since executing the Common calibration the last time have been reached.
•
Although a media type that color calibration can be executed on is loaded in the printer, there is no re-
cord or performing color calibration on that media, and the designated criteria from executing Common
calibration the last time have been reached.
Execute Common calibra-
tion.
(See "Color Calibration Us-
ing the Printer Sen-
sor.") ➔ P.735
Set Set Exec. Guide to Off
on the Control Panel menu.
(See "Menu Struc-
ture.") ➔ P.586
Please calibrate using above paper.
Please calibrate using above paper.
Cause Corrective Action
It is now recommended that you execute Unique calibration.
Note that this is displayed when Set Exec. Guide in the Control Panel menu is set to On and any of the
following is true.
•
If the printer is loaded with a type of paper on which color calibration can be executed, but there is no
record of having executed color calibration on that paper or a record of having executed Common calibra-
tion other any other type of paper.
•
If the printer is loaded with a type of paper on which color calibration can be executed, there is a record of
having executed color calibration on that paper, and the predefined conditions since executing the color
calibration the last time have been reached.
Execute Unique calibra-
tion.
(See "Color Calibration
Using the Printer Sen-
sor.") ➔ P.735
Set Set Exec. Guide to
Off on the Control Panel
menu.
(See "Menu Struc-
ture.") ➔ P.586
Borderless printng not possible. Paper stretched or shrank.
Borderless printng not possible. Paper stretched or shrank.
Cause Corrective Action
The loaded roll has expanded or contracted due to environmental
conditions, making it wider or narrower than the supported width for
borderless printing.
Press the OK button to stop printing.
Use each type of paper only where the recommended environmental
conditions are met. For details on environmental conditions for vari-
ous paper, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.") ➔ P.462
Before borderless printing, move the blue platen switch.
Before borderless printing, move the blue platen switch.
Cause Corrective Action
The blue Switch on the platen was set to the side opposite ●
when a borderless print job was received.
Before borderless printing, set the blue Switch on the platen to the ● side.
(See "Setting the Blue Switch on the Platen.") ➔ P.868
Blue platen switch is dirty.
Blue platen switch is dirty.
Cause Corrective Action
The blue Switch on the platen is dirty. Open the Top Cover and clean the blue Switch on the platen.
(See "Cleaning Inside the Top Cover.") ➔ P.840
Move the blue platen switch No.xx to the right. (xx represents a number)
Move the blue platen switch No.xx to the right. (xx represents a number)
Cause Corrective Action
The printer has detected that the blue Switch on the platen needed in
maintenance during printing is set away from the ● mark.
Set blue platen Switch of the indicated number toward the ● side.
(See "Setting the Blue Switch on the Platen.") ➔ P.868
Please commn calibrt using above paper.
iPF8400S
User's Guide
Error Message Messages regarding printing or adjustment
896
To Next Page
Loading...
