Canon IPF8400S - Matching

Matching
Matching
You can set the matching.
Important
• If No color correction is selected under Color Mode, the Matching is not displayed.
•
Matching Mode
You can select a matching mode to suit the print job.
Setting Details
Driver Matching Mode ➔ P.372 Enables printing of optimal color tones using a driver specific color profile. You should normally
select this mode.
ICC Matching Mode ➔ P.373 Enables color matching using ICC profiles. Select this if you want to print by specifying the
input profile, printer profile, and matching method in detail. This allows you to use ICC profiles
for digital cameras and scanners, ICC profiles created using the profile creation tool, etc.
ColorSync ➔ P.374 Enables color matching by using the ColorSync function of OS X. Select this if you want to
perform soft proofing using ColorSync before printing.
Note
• You need to set each correction on the printer driver.
• ColorSync needs to be selected in the Color Matching panel of the driver in order to select ColorSync.
•
Matching Method
You can select a matching method to suit the print job.
• Color Space
Select the color space.
Note
• You can select only after Driver Matching Mode has been selected in Matching Mode.
• Gamma
You can adjust the gradation of intermediate tones in an image. 2.2 is normally selected. If you want a softer
impression than 2.2, select 1.8.
iPF8400S
Matching
User's Guide
Mac OS Software Free Layout
371