Canon IPF8400S - The Roll Is Empty; No Sheets; Sheet Printing Is Selected; Regular Printing Is Selected, but a Roll Is Loaded

The roll is empty.
The roll is empty.
Cause Corrective Action
The roll is empty. Follow these steps to replace the used roll with a new roll of the same type and size.
1. Lift the Release Lever and remove the roll.
(See "Removing the Roll from the Printer.") ➔ P.477
(See "Removing the Roll Holder from Rolls.") ➔ P.479
2. Load the new roll.
(See "Attaching the Roll Holder to Rolls.") ➔ P.469
(See "Loading Rolls in the Printer.") ➔ P.471
3. If no barcode was printed on the roll, specify the type of paper.
(See "Changing the Type of Paper.") ➔ P.475
4. When you have selected ManageRemainRoll > On in the control panel menu and a barcode is
not printed on the roll, also specify the paper length.
(See "Specifying the Paper Length.") ➔ P.477
5. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on which the error occurred.
There is remaining roll paper, but
because it could not be advanced,
it could not be detected.
• If the trailing edge of the paper
is taped to the roll paper core
The paper was not advanced because the trailing edge is taped to the roll paper core.
Remove the used roll paper and insert a new roll paper.
(See "Removing the Roll from the Printer.") ➔ P.477
(See "Removing the Roll Holder from Rolls.") ➔ P.479
(See "Loading and Printing on Rolls.") ➔ P.22
There is remaining roll paper, but
because it could not be advanced,
it could not be detected.
• If the unused portion of the roll
paper is heavy and is placing a
burden on the printer
The paper was not advanced because the unused portion of the roll paper is heavy and is placing a
burden on the printer.
It may be helpful to change the printing mode, which will change the paper feed timing.
Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.") ➔ P.57
No sheets.
No sheets.
Cause Corrective Action
A sheet has come out of the printer during printing.
1.
Lift the Release Lever and remove the paper.
2. Reload the paper.
(See "Loading Sheets in the Printer.") ➔ P.492
Sheet printing is selected.
Sheet printing is selected.
Cause Corrective Action
You have attempted to print on a sheet, but no
sheet is loaded.
Press ▲ or ▼ to select Load Paper, and then press the OK button. Load a sheet, and
then print.
(See "Loading and Printing on Sheets.") ➔ P.25
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
Regular printing is selected, but a roll is loaded.
Regular printing is selected, but a roll is loaded.
Cause Corrective Action
A print job for printing on sheets
was sent when a roll is loaded.
1.
Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop printing.
The roll is empty. iPF8400S
User's Guide
Error Message Messages regarding paper
888