Canon IPF8400S - Specifying the Cutting Method for Rolls

2
Select the Main pane and click C Settings in A Media
Type.
3
In the Paper Detailed Settings dialog box displayed
next, select the desired settings values in C Be-
tween Pages and D Between Scans in B Drying
Time, and then click OK.
(See "Paper Detailed Settings Dialog Box (Mac
OS).") ➔ P.326
Specifying the Cutting Method for Rolls
Specifying the Cutting Method for Rolls
How rolls are cut after ejection varies depending on printer settings.
Cutting Method Printer Setting Driver Setting
Automatic The roll is automatically cut by the Cutter Unit follow-
ing printer driver settings.
Media
Menu > Pa-
per Details
> (Various
Types of
Paper) >
Cutting
Mode
Automatic Auto Cut
(See "Cut-
ting Roll Pa-
per After
Print-
ing.")
➔ P.144
Yes
Eject (when
the paper
surface is
being
scratched /
to wait for
ink to dry)
Select this to move the cutter by key operation and
cut paper. Although there are cases with Automatic
in which the paper falls and the paper surface is
scratched when the paper rubs the Output Stacker,
you can avoid damaging the paper with this method
since you can cut by holding the paper with your hand
so that the paper does not fall when cutting, Also,
since you can cut while visually confirming the drying
of the ink, you can avoid ejecting paper before the ink
has dried.
To cut the roll with the Cutter Unit, press the Cut but-
ton.
Eject Yes
iPF8400S Specifying the Cutting Method for Rolls
User's Guide
Handling and Use of Paper Handling rolls
483