First Level Second Level Third Level Fourth Level Fifth Level Sixth Level Seventh Level
Print After
Recv
Off* | On
Common Box
Set.(*4)(*8)
Print* | Print (Auto Del)
Show Job
Log(*8)
Off | On*
Take-up
Reel(*12)
Use Take-up
Reel
Disable* | Enable
Auto Feed(*13)
Skip Take-Up
Err(*14)
Off* | On
Prep.Move-
Printer
Level 1 | Level 2 | Level 3
Admin.
Menu(*9)
Change Pass-
word(*9)
(The screen for setting the password is displayed)
Init.Admin.Pswd(*9)
Adj. Fine Feed(*15)(*16)
Printer In-
fo(*15)
Paper Info
Ink Info
Head Info ProductName:
s/n:
Days elapsed:
Count [Mdot]:
Printhead L ProductName: | s/n: | Days elapsed: | Count [Mdot]:
Printhead R ProductName: | s/n: | Days elapsed: | Count [Mdot]:
System Info
Error Log
Other Counter
*1: Available after you have used Standard or Initial adjustmt in Head Posi. Adj. once.
*2: Available if Adj. Priority is Automatic or Print Quality.
*3: Available if Adj. Priority is Automatic or Print Length.
*4: Not displayed if IPv4 Mode is Manual.
*5: Not displayed if NetWare is Off.
*6: Not displayed if Auto Detect is On.
*7: Follows the setting in Date Format.
*8: Viewing and configuration is possible for administrators, and only viewing for other users.
*9: Viewing and configuration is possible for administrators only.
*10: Not displayed if IPv6 Support is Off.
*11: Default setting for the time to enter the power save mode/Sleep mode is recommended.
*12: Displayed only when the Media Take-up Unit is attached.
*13: Available if: (a) Use Take-up Reel is Enable, (b) roll paper is loaded, and (c) you have not executed Auto Feed for the loaded roll.
*14: Available when Use Take-up Reel is Enable.
*15: Displayed as the menu during printing while printing is in progress.
*16: Not displayed in the regular menu.
Menu Structure
iPF8400S
User's Guide
Control Panel Printer Menu
590
To Next Page
Loading...
