Using the Control Panel
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Job tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Job Menu is displayed.
3
Press ▲ or ▼ to select HDD Information, and then press the OK button.
Using RemoteUI
To view the box list, select Stored Job in Job Management. On the Stored Job page, the free hard disk space is
shown in the upper-right corner when boxes are listed.
For details, refer to the RemoteUI help file.
Using imagePROGRAF Status Monitor
The Hard Disk sheet shows the free hard disk space.
For details, refer to the imagePROGRAF Status Monitor help file.
iPF8400S
Checking the Free Hard Disk Space
User's Guide
Printer Parts Hard Disk
617
To Next Page
Loading...
