For details, refer to the RemoteUI help.
Using imagePROGRAF Status Monitor (Windows)
1
On the Hard Disk sheet, select the personal box and
click Open.
2
In the Documents dialog box, click Settings.
3
In the Settings dialog box, specify the password and click OK.
•
Set password
Select the check box.
•
Password
Enter the password. (This field is limited to four digits in the range 0001–9999.)
•
Re-enter to confirm
Re-enter the password to confirm it.
iPF8400S
Setting Passwords for Personal Boxes
User's Guide
Print Job Management Advanced Print Job Operations
693
To Next Page
