Casio FX-CG20 AU User Manual

13-10
2. Performing Data Communication between Two
Calculators
k Connecting Two Calculators
The following procedure describes how to connect two calculators with the optionally available
SB-62 cable*.
* Included with the calculator in some areas.
u To connect two calculators
1. Check to make sure that the power of both calculators is off.
2. Connect the two calculators using the cable.
3. Perform the following steps on both calculators to specify 3PIN as the cable type.
(1) From the Main Menu, enter the Link mode.
(2) Press 4(CABLE). This displays the cable type selection screen.
(3) Press 2(3PIN).
SB-62 cable
• Models that are supported for this configuration are shown below.
fx-CG10, fx-CG20, fx-CG20 AU, fx-CG20 CN, fx-9860G
II SD, fx-9860G II , fx-9860G AU
PLUS, fx-9750G
II , fx-7400G II , fx-9860G Slim (OS 1.11), fx-9860G SD (OS 2.0), fx-9860G
(OS 2.0), fx-9860G AU (OS 2.0), CFX-9850G series

Casio FX-CG20 AU Specifications

General

Brand	Casio
Model	FX-CG20 AU
Category	Calculator
Language	English