14-55
k Specifying the Number Format of a Measurement
You can specify the number format for each measurement on the screen.
Note
• The initial default number format is “Fix2”. For details about number formats, see “Specifying
the Angle Unit and Display Format” (page 2-12).
• Regardless of the current number format setting, integer values are always displayed with
their decimal parts cut off.
u To specify the number format of a measurement
Example: To specify one decimal places for measurement values
1. Select the measurement whose number format you want
to change.
2. Perform the following operation: K(Option) – 3:Number Format.
• This displays the Number Format dialog box.
3. Move the highlighting to the number format you want. Since we want to specify one decimal
places, we will select “Fix1” here.
4. Press w.
→
To Next Page
Loading...
