D-Link xStack DGS-3420 Series - Page 1008

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
1003
Example
To enable broadcast ping reply state:
DGS-3420-28SC:admin# enable broadcast_ping_reply
Command: enable broadcast_ping_reply
Success.
DGS-3420-28SC:admin#
29-24 disable broadcast_ping_reply
Description
The disable broadcast_ping_reply command used to disable broadcast ping reply state, device won’t
reply broadcast ping request.
Format
disable broadcast_ping_reply
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable broadcast ping reply state:
DGS-3420-28SC:admin# disable broadcast_ping_reply
Command: disable broadcast_ping_reply
Success.
DGS-3420-28SC:admin#
29-25 show broadcast_ping_reply
Description
The show broadcast_ping_reply command is used to show the broadcast ping reply state.