D-Link xStack DGS-3420 Series - Page 1007

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
1002
Format
show telnet source_ipif
Parameters
None.
Restrictions
None.
Example
To display the source address for the TELNET client:
DGS-3420-28SC:admin#show telnet source_ipif
Command: show telnet source_ipif
Telnet Source IP Interface Configuration:
IP Interface : System
IPv4 Address : 10.90.90.90
IPv6 Address : None
DGS-3420-28SC:admin#
29-23 enable broadcast_ping_reply
Description
The enable broadcast_ping_reply command used to enable broadcast ping reply state, device will
reply broadcast ping request.
Format
enable broadcast_ping_reply
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.