D-Link xStack DGS-3420 Series - Page 1042

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
1037
<vlanid 2-4094> - Specify the VLAN ID between 2 and 4094.
add - Specify to add isolated or community.
isolated - Specify the secondary VLAN as an isolated VLAN.
community - Specify the secondary VLAN as a community VLAN.
remove - Specify to remove the specified private VLAN.
<vlan_name 32> - Specify the VLAN of a range of secondary VLANs to add to the private VLAN or
remove from it. The maximum length is 32 characters.
vlanid - Specify a range of the second VLAN IDs to add to the private VLAN or remove from it.
<vidlist> - Specify the VLAN ID.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To associate secondary VLAN to private VLAN p1:
DGS-3420-28SC:admin#config private_vlan p1 add community vlanid 2-5
Command: config private_vlan p1 add community vlanid 2-5
Success.
DGS-3420-28SC:admin#
32-17 show private_vlan
Description
This command is used to display private VLAN information on the switch.
Format
show private_vlan {[<vlan_name 32> | vlanid <vidlist>]}
Parameters
<vlan_name 32> - (Optional) Specify the name of the private VLAN. The maximum length is 32
characters.
vlanid - (Optional) Specify the VLAN ID of the private VLAN.
<vidlist> - Specify the VLAN ID of the private VLAN.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To display private VLAN settings: