D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
125
5-11 show cpu access_profile
Description
This command is used to display the current CPU access list table.
Format
show cpu access_profile {profile_id <value 1-5>}
Parameters
profile_id - (Optional) Specify the index of an access list profile.
<value 1-5> - Specify value between 1 and 5.
Restrictions
None.
Example
To display the current CPU access list table:
DGS-3420-28SC:admin#show cpu access_profile
Command: show cpu access_profile
CPU Interface Filtering State: Disabled
CPU Interface Access Profile Table
Total Unused Rule Entries : 93
Total Used Rule Entries : 7
================================================================================
Profile ID: 1 Type: IPv4
MASK on
Dest IP : 255.255.255.255
IGMP
Unused Rule Entries: 93
--------------------------------------------------------------------------------
Rule ID : 1 Ports: 2
Match on
IGMP
Action:
Deny

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English