D-Link xStack DGS-3420 Series - Page 216

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
211
DGS-3420-28SC:admin#show cfm pkt_cnt ports 1-2
Command: show cfm pkt_cnt ports 1-2
CFM RX Statistics
------------------------------------------------------------------------------
Port AllPkt CCM LBR LBM LTR LTM VidDrop OpcoDrop
----- -------- -------- -------- --------- ------ ------- -------- --------
All 0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0 0
2 0 0 0 0 0 0 0 0
CFM TX Statistics
----------------------------------------------------------
Port AllPkt CCM LBR LBM LTR LTM
----- -------- -------- -------- --------- ------ -------
All 0 0 0 0 0 0
1 0 0 0 0 0 0
2 0 0 0 0 0 0
DGS-3420-28SC:admin#
14-26 clear cfm pkt_cnt
Description
This command is used to clear the CFM packet’s RX/TX counters.
Format
clear cfm pkt_cnt {[ports <portlist> {[rx | tx]} | [rx | tx] | ccm]}
Parameters
ports - (Optional) Specify the port counters to clear. If not specified, all ports will be cleared.
<portlist> - Specify a list of ports.
rx - (Optional) Clear the RX counter. If not specified, both the RX and TX counters will be cleared.
tx - (Optional) Clear the TX counter. If not specified, both the RX and TX counters will be cleared.
rx - (Optional) Clear the RX counter. If not specified, both the RX and TX counters will be cleared.
tx - (Optional) Clear the TX counter. If not specified, both the RX and TX counters will be cleared.
ccm - (Optional) Clear The CCM RX counters.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To clear all the CFM packet RX/TX counters: