D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
264
Restrictions
Only Administrator-level users can issue this command.
Example
To enable the RIPng interface debug:
DGS-3420-28SC:admin# debug ripng flag interface state enable
Command: debug ripng flag interface state enable
Success.
DGS-3420-28SC:admin#
After enabling RIPng on an interface, the following information may appear when the interface state
changes.
The RIPng interface System has changed the link state to down.
19-28 debug ripng show flag
Description
This command is used to display the RIPng debug flag setting.
Format
debug ripng show flag
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To show the current RIPng debug flag setting:

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English