D-Link xStack DGS-3420 Series - Page 273

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
268
Example
To display the DHCPv6 snooping binding state of entries:
DGS-3420-28SC:admin# debug show address_binding binding_state_table dhcpv6_snooping
Command: debug show address_binding binding_state_table dhcpv6_snooping
S (State) - S: Start, L: Live, D :Detection, R: Renew, B: Bound
Time - Expiry Time (sec)
IP Address MAC Address S Time Port
--------------------------------------- ----------------- -- ---------- -----
2001:2222:1111:7777:5555:6666:7777:8888 00-00-00-00-00-02 S 50 5
2001::1 00-00-00-00-03-02 B 100 6
Total Entries : 2
DGS-3420-28SC:admin#
To display the ND Snooping binding state of entries:
DGS-3420-28SC:admin# debug show address_binding binding_state_table nd_snooping
Command: debug show address_binding binding_state_table nd_snooping
S (State) - S: Start, Q: Query, B: Bound
Time - Expiry Time (sec)
IP Address MAC Address S Time Port
--------------------------------------- ----------------- -- ---------- -----
2001:2222:1111:7777:5555:6666:7777:8888 00-00-00-00-00-02 S 50 5
2001::1 00-00-00-00-03-02 B 100 6
Total Entries : 2
DGS-3420-28SC:admin#
19-33 debug show error ports box_id
Description
This command is used to show the error statistics information of the SIO ports
Format
debug show error ports box_id [<value 1-12> | all] {sio1 | sio2}
Parameters
<value 1-12> - Enter the box ID used here. This value must be between 1 and 12.