D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
274
19-38 debug vrrp log state
Description
This command is used to enable or disable the VRRP debug log state.
Format
debug vrrp log state [enable | disable]
Parameters
enable - Specify that the VRRP debug log state will be enabled.
disable - Specify that the VRRP debug log state will be disabled.
Restrictions
Only Administrator level can issue this command.
Example
To enable the VRRP debug log state:
DGS-3420-28SC:admin#debug vrrp log state enable
Command: debug vrrp log state enable
Success.
DGS-3420-28SC:admin#
19-39 debug vrrp show counter
Description
This command is used to display the VRRP debug statistic counters.
Format
debug vrrp show counter
Parameters
None.
Restrictions
Only Administrator level can issue this command.

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English