D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
273
DGS-3420-28SC:admin#debug vrrp interface_change state enable
Command: debug vrrp interface_change state enable
Success.
DGS-3420-28SC:admin#
To enable the VRRP timers debug flag:
DGS-3420-28SC:admin#debug vrrp timers state enable
Command: debug vrrp timers state enable
Success.
DGS-3420-28SC:admin#
19-37 debug vrrp clear counter
Description
This command is used to reset the VRRP debug statistic counters.
Format
debug vrrp clear counter
Parameters
None.
Restrictions
Only Administrator level can issue this command.
Example
To clear VRRP statistic counters:
DGS-3420-28SC:admin#debug vrrp clear counter
Command: debug vrrp clear counter
Success.
DGS-3420-28SC:admin#

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English