D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
302
Parameters
begin_address - Specify the starting address of the IP address range.
<ipaddr> - Specify the starting address of the IP address range.
end_address - Specify the ending address of the IP address range.
<ipaddr> - Specify the ending address of the IP address range.
all - Specify to delete all excluded IP addresses.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a DHCP server exclude address:
DGS-3420-28SC:admin#delete dhcp excluded_address begin_address 10.10.10.1
end_address 10.10.10.10
Command: delete dhcp excluded_address begin_address 10.10.10.1 end_address
10.10.10.10
Success.
DGS-3420-28SC:admin#
22-3 show dhcp excluded_address
Description
This command is used to display the groups of IP addresses which are excluded from being a legal
assigned IP address.
Format
show dhcp excluded_address
Parameters
None.
Restrictions
None.
Example
To display the DHCP server excluded addresses:

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English