D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
303
DGS-3420-28SC:admin#show dhcp excluded_address
Command: show dhcp excluded_address
Index Begin Address End Address
----- ------------- --------------
1 192.168.0.1 192.168.0.100
2 10.10.10.10 10.10.10.11
Total Entries : 2
DGS-3420-28SC:admin#
22-4 create dhcp pool
Description
This command is used to create a DHCP pool by specifying a name. After creating a DHCP pool, use
other DHCP pool configuration commands to configure parameters for the pool.
Format
create dhcp pool <pool_name 12>
Parameters
<pool_name 12> - Specify the name of the DHCP pool.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a DHCP pool:
DGS-3420-28SC:admin#create dhcp pool nyknicks
Command: create dhcp pool nyknicks
Success.
DGS-3420-28SC:admin#
22-5 delete dhcp pool
Description
This command is used to delete a DHCP pool.

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English