D-Link xStack DGS-3420 Series - Page 348

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
343
Format
show filter icmpv6_ra_all_node
Parameters
None.
Restrictions
None.
Example
To display filter ICMPv6 RA all-nodes information:
DGS-3420-28SC:admin#show filter icmpv6_ra_all_node
Command: show filter icmpv6_ra_all_node
Enabled ports:1:1-1:8
Trap State: Enabled
Log State: Enabled
Permit Source Address Table:
Source IP Address Port
--------------------------------------- ---------------
2200::5 1:5
Total Entries:1
DGS-3420-28SC:admin#
23-16 delete filter icmpv6_ra_all_node permit sip
Description
This command is used to delete a filter ICMPv6 RA all-nodes permit entry.
Format
delete filter icmpv6_ra_all_node permit sip <ipv6addr>
Parameters
<ipv6addr> - Enter the source IPv6 address of the entry which will be deleted in the filter ICMPv6
RA all-nodes forward list.