D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
354
Format
config dhcpv6 pool domain_name <pool_name 12> <domain_name 255>
Parameters
<pool_name 12> - Enter the DHCPv6 pool name used here. This name can be up to 12
characters long.
<domain_name 255> - Enter the domain name used here. This name can be up to 255
characters long.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the domain name for the DHCPv6 pool pool1:
DGS-3420-28SC:admin# config dhcpv6 pool domain_name pool1 dlink.com
Command: config dhcpv6 pool domain_name pool1 dlink.com
Success.
DGS-3420-28SC:admin#
25-6 config dhcpv6 pool dns_server
Description
This command is used to configure the DNS server’s IPv6 addresses for a specific DHCPv6 pool.
Users may add up to two DNS Server addresses. If DNS server is not specified, the DNS server
information will not be provided to the client. Users could delete a DNS server address in the method
of setting the DNS server address to zero.
Format
config dhcpv6 pool dns_server <pool_name 12> <ipv6addr> {<ipv6addr>}
Parameters
<pool_name 12> - Enter the DHCPv6 pool name used here. This name can be up to 12
characters long.
<ipv6addr> - Enter the primary DNS Server IPv6 address used for this pool here.
<ipv6addr> - (Optional) Enter the secondary DNS Server IPv6 address used for this pool here.

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English