D-Link xStack DGS-3420 Series - Page 366

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
361
Format
disable dhcpv6_server
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the DHCPv6 server global state to disable:
DGS-3420-28SC:admin# disable dhcpv6_server
Command: disable dhcpv6_server
Success.
DGS-3420-28SC:admin#
25-15 show dhcpv6_server
Description
This command is used to display the DHCPv6 server setting.
Format
show dhcpv6_server {ipif <ipif_name 12>}
Parameters
ipif - (Optional) Specifies the IP interface name to be displayed.
<ipif_name 12> - Enter the IP interface name to be displayed here. This name can be up to
12 characters long.
Restrictions
None.
Example
To display the DHCPv6 server setting: