D-Link xStack DGS-3420 Series - Page 368

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
363
Example
To add the IPv6 addresses range that DHCPv6 server should not assign to clients:
DGS-3420-28SC:admin# config dhcpv6 pool excluded_address pool1 add begin 2000::3
end 2000::8
Command: config dhcpv6 pool excluded_address pool1 add begin 2000::3 end 2000::8
Success.
DGS-3420-28SC:admin#
25-17 show dhcpv6 excluded_address
Description
This command is used to display the groups of IPv6 addresses which are excluded from the legal
assigned IPv6 address
Format
show dhcpv6 excluded_address {<pool_name 12>}
Parameters
<pool_name 12> - (Optional) Enter the DHCPv6 pool name used here. This name can be up to
12 characters long.
Restrictions
None.
Example
To display the excluded address information: