D-Link xStack DGS-3420 Series - Page 38

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
33
Format
enable 802.1x
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the 802.1X function:
DGS-3420-28SC:admin#enable 802.1x
Command: enable 802.1x
Success.
DGS-3420-28SC:admin#
3-2 disable 802.1x
Description
This command is used to disable the 802.1X function.
Format
disable 802.1x
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the 802.1X function:
DGS-3420-28SC:admin#disable 802.1x
Command: disable 802.1x