D-Link xStack DGS-3420 Series - Page 39

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
34
Success.
DGS-3420-28SC:admin#
3-3 create 802.1x user
Description
This command is used to create an 802.1X user.
Format
create 802.1x user <username 15>
Parameters
<username 15> - Specify to add a user name.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a user named “ctsnow”:
DGS-3420-28SC:admin#create 802.1x user ctsnow
Command: create 802.1x user ctsnow
Enter a case-sensitive new password:
Enter the new password again for confirmation:
Success.
DGS-3420-28SC:admin#
3-4 delete 802.1x user
Description
This command is used to delete a specified user.
Format
delete 802.1x user <username 15>