xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
382
DGS-3420-28SC:admin# show name_server
Command: show name_server
Name Server Time Out: 3 seconds
Static Name Server Table:
Server IP Address Priority
--------------------- --------------
20.20.20.20 Secondary
10.1.1.1 Primary
Dynamic Name Server Table:
Server IP Address Priority
--------------------- --------------
10.48.74.122 Primary
28-5 create host_name
Description
This command is used to create the static host name entry of the Switch.
Format
create host_name <name 255> [<ipaddr> | <ipv6addr>]
Parameters
<name 255> - Enter the hostname used here. This name can be up to 255 characters long.
<ipaddr> - Enter the host IPv4 address used here.
<ipv6addr> - Enter the host IPv6 address used here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create static host name “www.example.com”:
DGS-3420-28SC:admin# create host_name www.example.com 10.10.10.10
Command: create host_name www.example.com 10.10.10.10
Success.
To Next Page
Loading...
