D-Link xStack DGS-3420 Series - Page 388

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
383
28-6 delete host_name
Description
This command is used to delete the static or dynamic host name entries of the Switch.
Format
delete host_name [<name 255> | all]
Parameters
<name 255> - Enter the hostname used here. This name can be up to 255 characters long.
all - Specifies that all the hostnames will be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete the static host name entry “www.example.com”:
DGS-3420-28SC:admin# delete host_name www.example.com
Command: delete host_name www.example.com
Success.
DGS-3420-28SC:admin#
28-7 show host_name
Description
This command is used to display the current host name.
Format
show host_name {static | dynamic}
Parameters
static – (Optional) Specifies to display the static host name entries.
dynamic – (Optional) Specifies to display the dynamic host name entries.
Restrictions
None.