D-Link xStack DGS-3420 Series - Page 389

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
384
Example
To display the static and dynamic host name entries:
DGS-3420-28SC:admin#show host_name
Command: show host_name
Static Host Name Table
Host Name : hostname1.com
IP Address : 10.90.90.10
Host Name : hostname2.com
IPv6 Address : 3000::3
Total Static Entries: 2
Dynamic Host Name Table
Total Dynamic Entries: 0
DGS-3420-28SC:admin#
28-8 enable dns_resolver
Description
This command is used to enable the DNS Resolver state of the Switch.
Format
enable dns_resolver
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the DNS Resolver state to enabled: