D-Link xStack DGS-3420 Series - Page 390

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
385
DGS-3420-28SC:admin# enable dns_resolver
Command: enable dns_resolver
Success.
DGS-3420-28SC:admin#
28-9 disable dns_resolver
Description
This command is used to disable the DNS Resolver state of the Switch.
Format
disable dns_resolver
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the DNS Resolver state to disabled:
DGS-3420-28SC:admin# disable dns_resolver
Command: disable dns_resolver
Success.
DGS-3420-28SC:admin#