D-Link xStack DGS-3420 Series - Page 392

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
387
state - (Optional) Specifies the DoS Attack Prevention state.
enable - Specifies that the DoS Attack Prevention state will be enabled.
disable - Specifies that the DoS Attack Prevention state will be disabled.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure land attack and blat attack prevention, the action is drop:
DGS-3420-28SC:admin#config dos_prevention dos_type land_attack blat_attack action
drop state enable
Command: config dos_prevention dos_type land_attack blat_attack action drop state
enable
Success.
DGS-3420-28SC:admin#
29-2 config dos_prevention log
Description
This command is used to enable or disable the DoS prevention log state.
Format
config dos_prevention log [enable | disable]
Parameters
enable - Specifies to enable the DoS prevention log state.
disable - Specifies to disable the DoS prevention log state.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the DoS prevention log: