D-Link xStack DGS-3420 Series - Page 393

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
388
DGS-3420-28SC:admin#config dos_prevention log enable
Command: config dos_prevention log enable
Success.
DGS-3420-28SC:admin#
29-3 config dos_prevention trap
Description
This command is used to enable or disable the DoS prevention trap state.
Format
config dos_prevention trap [enable | disable]
Parameters
enable - Specifies to enable the DoS prevention trap state.
disable - Specifies to disable the DoS prevention trap state.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the DoS prevention trap:
DGS-3420-28SC:admin#config dos_prevention trap disable
Command: config dos_prevention trap disable
Success.
DGS-3420-28SC:admin#
29-4 show dos_prevention
Description
This command is used to display DoS prevention information.
Format
show dos_prevention {land_attack | blat_attack | tcp_null_scan | tcp_xmasscan | tcp_synfin |
tcp_syn_srcport_less_1024 | ping_death_attack | tcp_tiny_frag_attack}