D-Link xStack DGS-3420 Series - Page 423

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
418
DGS-3420-28SC:admin#show storage_media_info
Command: show storage_media_info
Unit Drive Media Type Size Label FS Type Version
---- ----- ---------- -------- ----------- ------- -------
1 c: Flash 123 MB FFS Ver2.1
DGS-3420-28SC:admin#
35-2 md
Description
This command is used to create a directory.
Format
md {{unit <unit_id>} <drive_id>} <pathname>
Parameters
unit - Specifies the unit ID in the stacking system. If not specified, it refers to the master unit.
<unit_id> - Enter the unit ID value here.
<drive_id> - Specifies the drive ID. If not specified, it refers to the current drive.
<pathname> - Specify the directory to be created. The path name can be specified either as a
full path name or partial name. For a partial path name, it indicates the directory is in the
current directory.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To create a directory:
DGS-3420-28SC:admin#md c:/abc
Command: md c:/abc
Success.
DGS-3420-28SC:admin#
35-3 rd
Description
This command is used to remove a directory. If there are files and directories still existing in the
directory, this command will fail and return an error message.