D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
419
Format
rd {{unit <unit_id>} <drive_id>} <pathname>
Parameters
unit - Specifies the unit ID in the stacking system. If not specified, it refers to the master unit.
<unit_id> - Enter the unit ID value here.
<drive_id> - Specifies the drive ID. If not specified, it refers to the current drive.
<pathname> - Specify the directory to be removed. The path name can be specified either as a
full path name or partial name. For a partial path name, it indicates the file is in the current
directory.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete an empty directory:
DGS-3420-28SC:admin#rd c:/abc
Command: rd c:/abc
Success.
DGS-3420-28SC:admin#
35-4 cd
Description
This command is used to change the current directory. The user can change the current directory to
another drive using this command. The current drive and current directory will be displayed if the
<pathname> is not specified.
Format
cd {<pathname>}
Parameters
<pathname> - (Optional) Specify the directory to be changed. The path name can be specified either
as a full path name or partial name. For a partial path name, it indicates the file is in the current
directory.

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English