D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
457
Report & Leave
IGMP v1 Report : 0
IGMP v2 Report : 0
IGMP v3 Report : 0
IGMP v2 Leave : 0
Total : 0
Total Entries : 1
DGS-3420-28SC:admin#
39-17 clear igmp_snooping statistics counter
Description
This command is used to clear the IGMP snooping statistics counter on the switch.
Format
clear igmp_snooping statistics counter
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To clear the IGMP snooping statistic counter:
DGS-3420-28SC:admin#clear igmp_snooping statistics counter
Command: clear igmp_snooping statistics counter
Success.
DGS-3420-28SC:admin#
39-18 show igmp_snooping forwarding
Description
This command is used to display the switch’s current IGMP snooping forwarding table. It provides an
easy way for users to check the list of ports that the multicast group comes from in terms of specific
sources. The packets come from the source VLAN. They will be forwarded to the forwarding ports.

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English