To Next Page

To Previous Page

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide

458

Format

show igmp_snooping forwarding {[vlan <vlan_name 32> | vlanid <vlanid_list>]}

Parameters

vlan - (Optional) Specify a VLAN to be displayed.

<vlan_name 32> - Specify the VLAN name. The maximum length is 32 characters.

vlanid - (Optional) Specify a list of VLANs to be displayed.

<vlanid_list> - Specify the VLAN ID list.

Note: If no parameter is specified, the system will display all current IGMP snooping

forwarding table entries of the switch.

Restrictions

None.

Example

To display all IGMP snooping forwarding entries located on the switch:

DGS-3420-28SC:admin#show igmp_snooping forwarding

Command: show igmp_snooping forwarding

VLAN Name : default

Source IP : 10.90.90.114

Multicast Group: 225.0.0.0

Port Member : 2,7

VLAN Name : default

Source IP : 10.90.90.10

Multicast Group: 225.0.0.1

Port Member : 2,5

Total Entries : 2

DGS-3420-28SC:admin#

39-19 clear igmp_snooping data_driven_group

Description

This command is used to clear the IGMP snooping group learned by data driven.

Format

clear igmp_snooping data_driven_group [all | [vlan_name <vlan_name 32> | vlanid

<vlanid_list>] [<ipaddr> | all]]

D-Link xStack DGS-3420 Series User Manual

Questions and Answers: