D-Link xStack DGS-3420 Series - Page 516

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
511
Restrictions
None.
Example
To show the IMPB entries that are currently blocked:
DGS-3420-28SC:admin#show address_binding blocked all
Command: show address_binding blocked all
VID VLAN Name MAC Address Port
---- -------------------------------- ----------------- ----
1 default 00-01-02-03-29-38 7
1 default 00-0C-6E-5C-67-F4 7
1 default 00-0C-F8-20-90-01 7
1 default 00-0E-35-C7-FA-3F 7
1 default 00-0E-A6-8F-72-EA 7
1 default 00-0E-A6-C3-34-BE 7
1 default 00-11-2F-6D-F3-AC 7
1 default 00-50-8D-36-89-48 7
1 default 00-50-BA-00-05-9E 7
1 default 00-50-BA-10-D8-F6 7
1 default 00-50-BA-38-7D-E0 7
1 default 00-50-BA-51-31-62 7
1 default 00-50-BA-DA-01-58 7
1 default 00-A0-C9-01-01-23 7
1 default 00-E0-18-D4-63-1C 7
Total Entries : 15
DGS-3420-28SC:admin#
44-10 show address_binding ip_mac
Description
This command is used to display the user created database of address binding information.
Format
show address_binding ip_mac [all | [[ipaddress <ipaddr> | ipv6address <ipv6addr>]
{mac_address <macaddr>} | mac_address <macaddr>]]
Parameters
ip_mac - (Optional) Specify the database that a user creates for address binding.
all - Specify to display all.
ipaddress - Specify the IP address.