xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
517
Restrictions
None.
Example
To display address binding DHCP snooping:
DGS-3420-28SC:admin#show address_binding dhcp_snoop
Command: show address_binding dhcp_snoop
DHCP Snoop(IPv4) : Disabled
DHCP Snoop(IPv6) : Disabled
To display the address binding DHCP snooping maximum entries on port 1 to 10:
DGS-3420-28SC:admin#show address_binding dhcp_snoop max_entry ports 1-10
Command: show address_binding dhcp_snoop max_entry ports 1-10
Port Max Entry Max IPv6 Entry
---- --------- --------------
1 No Limit No Limit
2 10 No Limit
3 20 No Limit
4 No Limit No Limit
5 No Limit No Limit
6 No Limit No Limit
7 No Limit No Limit
8 No Limit No Limit
9 No Limit No Limit
10 No Limit No Limit
44-17 show address_binding dhcp_snoop binding_entry
Description
This command is used to display DHCP snooping information of a specific binding entry.
Format
show address
_binding dhcp_s
noop binding_
entry {port <port>}
Parameters
port - (Optional) Specify a port on which to display the binding entry.
To Next Page
Loading...
Need help?
General