D-Link xStack DGS-3420 Series - Page 575

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
570
Format
show limited_multicast_addr [ ports <portlist> | vlanid <vlanid_list>] {[ipv4 | ipv6]}
Parameters
ports - Specify a range of ports to show the limited multicast address configuration.
<portlist> - Specify a range of ports to be displayed.
vlanid - Specify the VLAN ID of VLANs that require information displaying about the multicast
address filtering function.
<vlanid_list> - Enter the VLAN ID of the VLAN here.
ipv4 - (Optional) Specify to display the IPv4 multicast profile associated with the port or VLAN.
ipv6 - (Optional) Specify to display the IPv6 multicast profile associated with the port or VLAN.
Restrictions
None.
Example
To display the limited multicast address range on VLAN 1:
DGS-3420-28SC:admin#show limited_multicast_addr vlanid 1
Command: show limited_multicast_addr vlanid 1
VLAN ID : 1
Access : Deny
Profile ID Name Multicast Addresses
----------- ----------- -----------------------------
1 customer 224.19.62.34 – 224.19.162.200
DGS-3420-28SC:admin#
To display the limited multicast address range on ports 1 and 3:
DGS-3420-28SC:admin#show limited_multicast_addr ports 1,3
Command: show limited_multicast_addr ports 1,3
Port : 1
Access : Deny
Profile ID Name Multicast Addresses
----------- ----------- -----------------------------
1 customer 224.19.62.34 – 224.19.162.200
Port : 3
Access : Deny