D-Link xStack DGS-3420 Series - Page 599

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
594
Example
To display the switch’s general LLDP-MED configuration status:
DGS-3420-28SC:admin#show lldp_med
Command: show lldp_med
LLDP-MED System Information:
Device Class : Network Connectivity Device
Hardware Revision : B1
Firmware Revision : 1.00.003
Software Revision : 1.50.010
Serial Number : D1234567890
Manufacturer Name : D-Link
Model Name : DGS-3420-28SC Gigabit Ethernet S
Asset ID :
PoE Device Type : PSE Device
PoE PSE Power Source : Primary
LLDP-MED Configuration:
Fast Start Repeat Count : 4
LLDP-MED Log State:Disabled
DGS-3420-28SC:admin#
51-15 show lldp_med local_ports
Description
This command is used to display the per-port LLDP-MED information currently available for populating
outbound LLDP-MED advertisements.
Format
show lldp_med local_ports {<portlist>}
Parameters
<portlist> - Specify a range of ports to be displayed.
Note: When a port list is not specified, information for all ports will be displayed.
Restrictions
None.