D-Link xStack DGS-3420 Series - Page 598

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
593
Parameters
<portlist> - Specify a range of ports to be displayed.
Note: When a port list is not specified, information for all ports will be displayed.
Restrictions
None.
Example
To display LLDP-MED configuration information for port 1:
DGS-3420-28SC:admin#show lldp_med ports 1
Command: show lldp_med ports 1
Port ID : 1
------------------------------------------------------------
Topology Change Notification Status : Enabled
LLDP-MED Capabilities TLV : Enabled
LLDP-MED Network Policy TLV : Enabled
LLDP-MED Inventory TLV : Enabled
DGS-3420-28SC:admin#
51-14 show lldp_med
Description
This command is used to display the switch’s general LLDP-MED configuration status.
Format
show lldp_med
Parameters
None.
Restrictions
None.