D-Link xStack DGS-3420 Series - Page 632

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
627
Parameters
<macaddr> - Specify the MAC address that access is accepted by local mode.
vlan - If the MAC address is authorized, the port will be assigned to this VLAN.
<vlan_name 32> - Specify a VLAN name up to 32 characters long.
vlanid - If the MAC address is authorized, the port will be assigned to this VLAN ID.
<vlanid 1-4094> - Specify a VLAN ID between 1 and 4094.
clear_vlan - Specify to clear the specified VLAN.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure a local database entry:
DGS-3420-28SC:admin#config mac_based_access_control_local mac 00-00-00-00-00-01
vlan default
Command: config mac_based_access_control_local mac 00-00-00-00-00-01 vlan default
Success.
DGS-3420-28SC:admin#
55-12 config mac_based_access_control max_users
Description
This command is used to configure the MAC-based access control maximum number of authorized
users.
Format
config mac_based_access_control max_users [<value 1-4000> | no_limit]
Parameters
<value 1-4000> - Specify the maximum number of authorized users.
no_limit - Specify an unlimited number of authorized users.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the MAC-based access control maximum number of authorized users: