D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
633
Total Entries:1
DGS-3420-28SC:admin#
To display MAC-based access control local data by VLAN:
DGS-3420-28SC:admin#show mac_based_access_control_local vlan default
Command: show mac_based_access_control_local vlan default
MAC Address VID
----------------- ------
00-00-00-00-00-01 1
Total Entries: 1
DGS-3420-28SC:admin#
55-18 config mac_based_access_control log state
Description
This command is used to enable or disable the generating of MAC-based Access Control logs.
Format
config mac_based_access_control log state [enable | disable]
Parameters
state - Specifies the log state for MAC-based Access Control.
enable - Specifies that the log for MAC-based Access Control will be enabled.
disable - Specifies that the log for MAC-based Access Control will be disabled.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the log state for MAC-based Access Control:
DGS-3420-28SC:admin# config mac_based_access_control log state disable
Command: config mac_based_access_control log state disable
Success.
DGS-3420-28SC:admin#

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English