D-Link xStack DGS-3420 Series - Page 637

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
632
DGS-3420-28SC:admin#
55-17 show mac_based_access_control_local
Description
This command is used to display MAC-based access control local data.
Format
show mac_based_access_control_local {[mac <macaddr> | vlan <vlan_name 32> | vlanid
<vlanid 1-4094>]}
Parameters
mac - (Optional) Display MAC-based access control local databases by this MAC address.
<macaddr> - Enter the MAC address here.
vlan - (Optional) Specify the VLAN.
<vlan_name 32> - Specify the VLAN name up to 32 characters long.
vlanid - (Optional) Specify the VLAN ID.
<vlanid 1-4094> - Specify the VLAN ID value between 1 and 4094.
Restrictions
None.
Example
To display MAC-based access control local data:
DGS-3420-28SC:admin#show mac_based_access_control_local
Command: show mac_based_access_control_local
MAC Address VID
----------------- ------
00-00-00-00-00-01 1
Total Entries:1
DGS-3420-28SC:admin#
To display MAC-based access control local data by MAC address:
DGS-3420-28SC:admin#show mac_based_access_control_local mac 00-00-00-00-00-01
Command: show mac_based_access_control_local mac 00-00-00-00-00-01
MAC Address VID
----------------- ------
00-00-00-00-00-01 1