D-Link xStack DGS-3420 Series - Page 636

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
631
Parameters
ports - (Optional) Specify to display the MAC-based access control port state.
<portlist> - Specify a range of ports to be displayed.
Restrictions
None.
Example
To display MAC-based access control information:
DGS-3420-28SC:admin#show mac_based_access_control
Command: show mac_based_access_control
MAC-based Access Control
------------------------------------
State : Disabled
Method : Local
Password Type : Manual String
Password : default
Max User : No Limit
Guest VLAN :
Guest VLAN Member Ports:
RADIUS Authorization : Enabled
Local Authorization : Enabled
Trap State : Enabled
Log State : Enabled
DGS-3420-28SC:admin#
To display MAC-based access control information for ports 1 to 4:
DGS-3420-28SC:admin#show mac_based_access_control ports 1-4
Command: show mac_based_access_control ports 1-4
Port State Aging Time Block Time Max User
(min) (sec)
----- -------- ---------- --------- --------
1 Disabled 1440 300 1024
2 Disabled 1440 300 1024
3 Disabled 1440 300 1024
4 Disabled 1440 300 1024