D-Link xStack DGS-3420 Series - Page 662

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
657
58-11 config mld_snooping mrouter_ports
Description
This command allows users to designate a range of ports as being connected to multicast-enabled
routers. This will ensure that all packets with such a router as its destination will reach the multicast-
enabled router, regardless of protocol.
Format
config mld_snooping mrouter_ports [vlan <vlan_name 32> | vlanid <vlanid_list>] [add | delete]
<portlist>
Parameters
vlan - Specify the name of the VLAN on which the router port resides.
<vlan_name 32> - Specify the name of the VLAN on which the router port resides. The maximum
length is 32 characters.
vlanid - Specify the ID of the VLAN on which the router port resides.
<vlanid_list> - Specify a list of VLAN IDs.
add - Specify to add router ports.
delete - Specify to delete router ports.
<portlist> - Specify a range of ports to be configured.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set up static router ports:
DGS-3420-28SC:admin#config mld_snooping mrouter_ports vlan default add 1-10
Command: config mld_snooping mrouter_ports vlan default add 1-10
Success.
DGS-3420-28SC:admin#
58-12 config mld_snooping mrouter_ports_forbidden
Description
This command allows you to designate a range of ports as being not connected to multicast-enabled
routers. This ensures that the forbidden router port will not propagate routing packets out.
Format
config mld_snooping mrouter_ports_forbidden [vlan <vlan_name 32> | vlanid <vlanid_list>]
[add | delete] <portlist>