D-Link xStack DGS-3420 Series - Page 663

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
658
Parameters
vlan - Specify the name of the VLAN on which the router port resides.
<vlan_name 32> - Specify the name of the VLAN on which the router port resides. The maximum
length is 32 characters.
vlanid - Specify the ID of the VLAN on which the router port resides.
<vlanid_list> - Specify a list of VLAN IDs.
add - Specify to add router ports.
delete - Specify to delete router ports.
<portlist> - Specify a range of ports to be configured.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set up ports as forbidden router port:
DGS-3420-28SC:admin#config mld_snooping mrouter_ports_forbidden vlan default add 1-
10
Command: config mld_snooping mrouter_ports_forbidden vlan default add 1-10
Success.
DGS-3420-28SC:admin#
58-13 enable mld_snooping
Description
This command is used to enable MLD snooping on the switch.
Format
enable mld_snooping
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable MLD snooping on the switch: