D-Link xStack DGS-3420 Series - Page 664

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
659
DGS-3420-28SC:admin#enable mld_snooping
Command: enable mld_snooping
Success.
DGS-3420-28SC:admin#
58-14 disable mld_snooping
Description
This command is used to disable MLD snooping on the switch. MLD snooping can be disabled only if
IPv6 multicast routing is not being used. Disabling MLD snooping allows all MLD and IPv6 multicast
traffic to flood within a given IPv6 interface.
Format
disable mld_snooping
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable MLD snooping on the switch:
DGS-3420-28SC:admin#disable mld_snooping
Command: disable mld_snooping
Success.
DGS-3420-28SC:admin#
58-15 show mld_snooping
Description
This command is used to display the current MLD snooping configuration on the switch.
Format
show mld_snooping {[vlan <vlan_name 32> | vlanid <vlanid_list>]}